118
Chapter 5
Congure the Router in Hotspot Router Mode
¾ To access the USB disk locally:
1. Connect Your USB Disk
Insert your USB storage device into the router’s USB port directly or using a USB cable.
Wait several seconds until the USB LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than 2 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to
Advanced > USB Settings > Storage Sharing and click Eject Disk.
2. Access Your USB Disk Locally
Refer to the following table for access instructions. You can customize user accounts by
referring to User Accounts.
Windows
computer
Open the Windows Explorer (or go to Computer), type the server
address ftp://tplinkwifi.net in the address bar, enter a username and
password and then press [Enter].
Note:
Here we take Windows 8 as an example.
To Next Page
Loading...
