204
Chapter 8
Configure the Router in Client Mode
8. 1. Status
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting > Status. You can view the current status information of the router in
Client Mode.
• Firmware Version - The version information of the router’s firmware.
• Hardware Version - The version information of the router’s hardware.
• Operation Mode - This field displays the current operation mode of the router.
• Wired - This field displays the current settings of the LAN, and you can configure them
on the Setting > Network > LAN page.
• MAC address - The physical address of the router.
• IP address - The LAN IP address of the router.
• Subnet Mask - The subnet mask associated with the LAN IP address.
To Next Page
Loading...
