TP-Link TP-TL-WR1043N - Page 49

46
Chapter 4 Configure the Router in Standard Router Mode
• Primary DNS (Optional) - Input the DNS IP address provided by your ISP.
• Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP
provides two DNS servers.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as Obtain an IP Address
automatically.
4. 4. 2. DHCP Client List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > DHCP > DHCP Client List to view the information of the clients
connected to the router.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the router has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, the dynamic IP address will be automatically renewed.
You cannot change any value on this page. To update this page and show the current
connected devices, click Refresh.
4. 4. 3. Address Reservation
You can reserve an IP address for a specific client. When you have specified a reserved
IP address for a PC on the LAN, this PC will always receive the same IP address each time
it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > DHCP > Address Reservation.
3. Click Add New and fill in the blanks.