48
Chapter 4
Configure the Router in Standard Router Mode
Windows
computer
Open the Windows Explorer (or go to Computer), type the server
address \\tplinkwifi.net in the address bar, enter a username and
password if required and then press [Enter].
Note:
Here we take Windows 8 as an example.
Mac
1 ) Click Go in the top left corner of the desktop and go to Connect
to Server.
2 ) Type the server address smb://tplinkwifi.net/volume1.
Note: Here we take volume1 for example.
3 ) Click Connect.
4 ) When prompted, select the Guest radio box (If you have set up a
username and password to deny anonymous access to the USB
disk, you should select the Registered User radio box. To learn
how to set up an account for the access, refer to User Accounts).
Tablet Use a third-party app for network files management.
¾ To Customize Your Settings:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > USB Settings > Storage Sharing.
To Next Page
Loading...
