50
Chapter 4
Configure the Router in Standard Router Mode
1. Insert your USB storage device into the router’s USB port directly or using a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3. Go to Advanced > USB Settings > FTP Server.
4. Click Start to enable the FTP Server.
5. Click Enable to enable the Internet access to the FTP server.
6. Specify a port number for the Service Port. The default value is 21.
7. Click Save.
¾ To specify a folder to be accessed via the FTP server:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > USB Settings > FTP Server.
3. Click Add New Folder.
4. Specify a name for the folder to be shared in the Display Name field. And select the
folder you want to share or select Share entire partition to share all folders.
To Next Page
Loading...
