83
Chapter 4
Configure the Router in Standard Router Mode
Note:
Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping Timeout” are used for
the Ping function. Option “Tracert Hops” is used for the Tracert function.
4. 14. 4. Firmware Upgrade
TP-LINK is dedicated to improving and richening the product features, giving users a better
network experience. We will release the latest firmware at the TP-LINK official website
www.tp-link.com. You can download the latest firmware file from the Support page and
upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3. Go to Advanced > System Tools > Firmware Upgrade.
4. Click Browse to locate the downloaded firmware file, and click Upgrade.
5. Wait a few minutes for the upgrade and reboot to complete.
4. 14. 5. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > System Tools > Factory Defaults. Click Restore to reset all settings
to the default values.
To Next Page
Loading...
