28
• For CPE220/WBS210/WBS510
Note that if you select AP Router as the operation mode, the status of Port0 will change to WAN,
and the management access will be disabled on this port after the process of quick setup. You
can connect to the Port1 of the device or wirelessly to manage it. If your want to manage the
device through Port0, configure the Remote Login IP Address. For details, refer to
6.5. Configure
Web Server
.
In the :$1&RQQHFWLRQ7\SH section, specify the connection type according to your
need and click
Next
.
The device supports three types of the WAN connection, including
PPPoE
,
Dynamic IP
and
Static
IP
. Contact your ISP to confirm your WAN connection type.
To Next Page
Loading...
