Need help?Do you have a question about the TP-Link WA801ND and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
|---|---|
| Frequency | 2.4-2.4835GHz |
| Antenna | 2*5dBi Detachable Omni Directional Antenna (RP-SMA) |
| Antenna Gain | 5dBi |
| Button | Reset Button |
| Operating Temperature | 0°C~40°C (32°F~104°F) |
| Storage Temperature | -40°C~70°C (-40°F~158°F) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
| Signal Rate | Up to 300Mbps |
| Wireless Security | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption |
| Ports | 1 10/100Mbps Ethernet Port (RJ45) |
| Wireless Modes | AP Mode, Multi-SSID Mode, Client Mode, Repeater Mode |
| Power Supply | 9VDC / 0.6A |
Details connecting and configuring the access point in Access Point mode.
Details connecting and configuring the access point in Repeater/Bridge mode.
Details connecting and configuring the access point in Client mode.
Details connecting and configuring the access point in Multi-SSID mode.
Outlines the steps for configuring the access point using the Quick Setup Wizard.
Describes using WPS for quick internet connection setup in specific modes.
Details various wireless settings like SSID, mode, channel, security, and advanced options.
Explains the procedure to reset the access point to factory defaults using the reset button.
To Next Page