TP-Link WA801ND - 4.1 Status

19
Chapter 4
Congure the Access Point
4. 1. Status
1. Visit http://tplinkap.net, and log in with the username and password you set for the
access point.
2. Go to Status. You can view the current status information of the access point.
• Firmware Version - The version information of the access point’s firmware.
• Hardware Version - The version information of the access point’s hardware.
• LAN - This field displays the current settings of the LAN, and you can configure them
on the Network > LAN page.
• MAC address - The physical address of the access point.
• IP address - The LAN IP address of the access point.
• Subnet Mask - The subnet mask associated with the LAN IP address.
• Wireless - This field displays the basic information or status of the wireless function,
and you can configure them on the Wireless > Wireless Settings page.
• Operation Mode - The current wireless working mode in use.
• Wireless Radio - The status of wireless radio.
• Name (SSID) - The SSID of the access point.