TP-Link WA801ND - Wireless Security (Access Point, Multi-SSID)

27
Chapter 4
Congure the Access Point
2. Enter the access point’s current PIN on your client device to join the access point’s
Wi-Fi network.
4. 3. 4. Wireless Security (Access Point, Multi-SSID)
1. Visit http://tplinkap.net, and log in with the username and password you set for the
access point.
2. Go to Wireless > Basic Settings.
3. 2 operation modes are supported here, including Access Point, and Multi - SSID.
4. Configure the security settings of your wireless network and click Save. The security
options are different for different operation mode.
Access Point
• Disable Wireless Security - The wireless security function can be enabled or disabled.
If disabled, wireless clients can connect to the access point without a password. It’s
strongly recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-
shared passphrase.
• Authentication Type - Select Auto, WPA-PSK or WPA2-PSK.