EasyManua.ls Logo

TP-Link WA801ND - Page 31

TP-Link WA801ND
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Chapter 4
Congure the Access Point
Encryption - Select Auto, TKIP or AES.
Wireless Password - Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds.
The value can be 0 or at least 30. Enter 0 to disable the update.
WPA /WPA2-Enterprise - It’s based on Radius Server.
Authentication Type - Select Auto, WPA or WPA2.
Encryption - Select Auto, TKIP or AES.
RADIUS Server IP - Enter the IP address of the Radius server.
RADIUS Server Port - Enter the port that Radius server used.
RADIUS Server Password - Enter the password for the Radius server.
Group Key Update Period - Specify the group key update interval in seconds.
The value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard.
Authentication Type - The default setting is Auto, which can select Shared
Key or Open System authentication type automatically based on the wireless
client’s capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here.
Hexadecimal format stands for any combination of hexadecimal digits (0-9,
a-f, A-F) in the specified length. ASCII format stands for any combination of
keyboard characters in the specified length.
WEP Key (Password) - Select which of the four keys will be used and enter the
matching WEP key. Make sure these values are identical on all wireless clients
in your network.
Key Type - Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption.
Disabled means this WEP key entry is invalid.
64-bit - Enter 10 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 5 ASCII characters.
128-bit - Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 13 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
You will be reminded to reboot the device after clicking the Save button.

Related product manuals