TP-Link WBS210 - Page 76

72
IPv6 Enable or disable the IPv6 function. If the IPv6 function is enabled, the
device will obtain a LAN IPv6 address. Select a method for the device to
obtain the LAN IPv6 address according to the information provided by
your ISP.
• 6WDWLF
Select static and enter the LAN IPv6 address and IPv6 netmask.
• 3UHIL['HOHJDWLRQ
Select Prefix Delegation and the device will obtain the LAN IPv6
address automatically.
IPv6 DHCP
Server
Enable or disable the IPv6 DHCP server function. With IPv6 DHCP server
enabled, the clients will obtain the IPv6 address from the DHCP server.
• 'LVDEOHG
Select Disabled to disable the IPv6 DHCP server function
• 6WDWHOHVV6WDWHIXO
Select Stateless or Stateful, and the clients will obtain the IPv6 address
from the IPv6 DHCP server automatically. Enable or disable the DNS
proxy. With this feature enabled, the device will obtain the DNS server
automatically. With this feature disabled, you should specify the DNS
address manually.
Click Apply , then click Save .
4.3 &RQILJXUH0DQDJHPHQW9/$1
Management VLAN provides a safer way for you to manage the device. With Management
VLAN enabled, only the hosts in the management VLAN can manage the device. Since
most hosts cannot process VLAN tags, connect the management host to the network via
a switch, and set up correct VLAN settings to ensure the communication between the host
and the device in the management VLAN.