Remote control handset
The V10 is supplied complete with the F10 remote control
handset, which can be used to operate all the essential
functions of the V10. The F10 can also control all
source devices, provided that they feature an Rlink control
socket.
Note:
The F1 universal remote control which is supplied
with televisions can also be used to operate the
V10. To use it for this purpose the F1 handset must be
set to HiFi mode; this is selected by pressing the left-
hand end of the
rocker repeatedly until the LED
above 'HiFi' glows.
The following table shows the remote control buttons and their functions when controlling the unit.
F10 F1 Function
Switches remote control handset between Hi-Fi, TV and VCR operation
Switches the amplifier on and off from STANDBY
• IIn Standby:
Switches the amplifier to Ready mode (main switch setting HV)
• While the amplifier is running:
-
A short press switches to Ready mode (HV))
-
A long press (approx. 2 sec.) switches to Standby
F
FF
F
Switches loudspeakers alternately on and off
Button for listing source:
Selected input
G
GG
G -
--
-
DISC
q
qq
q q
qq
q
TUNER
H
HH
H
1
11
1
AUX
4
44
4
H
HH
H,
,
AUX / PH
H
HH
H
F
FF
F
RECORDER
Note:
If the amplifier is in STANDBY mode, selecting a
source switches the amplifier on and at the same
time selects the corresponding source device.
j
jj
j j
jj
j
Volume control rocker
29
To Next Page
Loading...
Need help?
General
