OPERATION
23
ENVIRONMENTAL AWARENESS
When driving the vehicle, be carefulofpotential environmental hazardslike steep
slopes, rocks, tree branches,etc. that couldcause an incident that could result in vehicle
damage, personal injury or deat
h.
There is a risk of fire whenthe vehicle is operated near combustiblematerial.
Always be respectful of the environment.
Respect all wildlife and their habitat.
Respect private property and comply with all local laws and regulations governing the use of light duty utility vehicles.
Make sure you are permitted by property owners to operate the vehicle on their property.
If operating the vehicle on private property, obtain permission from the owner prior to entering their property.
STARTING AND STOPPING THE ENGINE
Unintentional roll-back of the vehiclecouldcause severe personal injury or vehicledam-
age. Toreduce the possibility of vehicle roll-back, keepthe brake fully pressed until the
enginehas started.
NOTICE: Avoid full throttle starts and fast acceleration until the engine has warmed up.
Always start the engine outdoors or in a well-ventilated space.
1. Sit in the driver’s seat.
2. Press and hold the brake pedal. If the vehicle is equipped with hydraulic brakes, release the hand operated park-
ing brake.
3. Insert the key and turn the key switch to the ON position.
4. Move the direction selector to the appropriate position.
NOTICE: When the direction selector is moved to the reverse position, a warning alarm will activate to indi-
cate that the vehicle is ready to run in reverse.
5. Slowly press the accelerator pedal to start the engine.
6. When the accelerator pedal is released, the ignition circuit is de-energized and the engine stops. To stop the
vehicle more quickly, press the brake pedal.
7. Engage the parking brake, turn the key switch to the OFF position, and remove the key from the switch before
exiting the vehicle.
Starting on a Hill
Unintentional roll-back of the vehiclecouldcause severe personal injury or vehicledam-
age. Toreduce the possibility of vehicle roll-back, keepthe brake fully pressed until the
enginehas started.
Turn the key switch to the OFF position and remove the ignition key when exiting the
vehicle to prevent accidental starting or unauthorized use.
To decrease the risk of permanent damage to the drive train,do not allow roll-back when
you start the vehicle on a hill.Do not use the accelerator andengine to hold the vehicle
at a stop on a hill.
1. Press the brake pedal with your left foot when releasing the parking brake. Keep pressure on the pedal to pre-
vent the vehicle from rolling back.
2. Press the accelerator pedal with your right foot as you release the brake pedal.
3. Press the accelerator pedal with gradual and steady pressure until the vehicle reaches the desired speed.
To Next Page
Loading...
