Trademaster BM-20 Plus User Manual

BEFORE USE, ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL .
Serial #............................................ Date of Purchase............................
Ver: 1.0 01/05/2015
OPERATOR’S MANUAL
PART# WA-B20+
BM-20 PLUS
BEVELLING MACHINE

Trademaster BM-20 Plus Specifications

General

Brand	Trademaster
Model	BM-20 Plus
Category	Power Tool
Language	English

Summary

Warranty Terms

General Information

Application

Details the use of the BM-20 for milling steel plates and pipes.

Technical Data

Lists voltage, power, speed, protection levels, milling speed, width, angle, and weight.

Machine Design

Identifies key components and controls of the bevelling machine.

Included Equipment

Lists the standard equipment supplied with the BM-20 plus.

Safety Precautions

Startup and Operation

Adjusting Bevel Angle and Width

Step-by-step guide to setting the bevel angle and width.

Machine Operation

Instructions on how to operate the bevelling machine, including feed rate.

Replacing Cutting Inserts

Procedure for replacing worn cutting inserts on the machine.

Replacing Milling Cutters

Instructions for removing and installing milling cutters.

Accessories

0° Guide Set for Facing Plates

Description and mounting instructions for the 0° guide set.

Guides for Bevelling Pipes

Instructions for adapting the machine to bevel pipes of various diameters.

Wiring Diagram

Spare and Wearing Parts

Parts Breakdown