Trademaster BM-20 Plus - Machine Design; Included Equipment

BM-20 PLUS Operator’s Manual 5
1.3. Design
Fig. 2. View of the machine and control panel
1.4. Equipment included
The BM-20 plus is supplied in a metal box with complete standard equipment. The
included equipment consists of:
Bevelling machine 1 unit
Cutting insert 10 units
Metal box 1 unit
Tool container 1 unit
6 mm hex wrench 1 unit
T15P torx screwdriver 1 unit
Grease for screws 1 unit
Operator’s Manual 1 unit
Guide set
Depth knob
Bevel width pitch
Bevel angle pitch
Bevel angle lock screws
Depth lock levers
Power switch
START
STOP
Motor lamp
Overload lamp
Milling cutters
Milling
cutters
cover