BM-20 PLUS Operator’s Manual2
IMPORTED & DISTRIBUTED BY
INDUSTRIAL TOOL & MACHINERY SALES
18 BUSINESS ST
YATALA QLD 4207 AUSTRALIA
T
F
E
W
07 3287 1114
07 3287 1115
sales@industrialtool.com.au
www.industrialtool.com.au
WARRANTY TERMS
In addition to any warranties or conditions implied by applicable Statute or Regulations, Industrial Tool
& Machinery Sales warrants all of it’s products against defective workmanship and faulty materials for
a period of twelve (12) months from the date of purchase, unless otherwise stated. At our option we will
repair or replace, free of charge, any item on the condition that:
• The complete machine or tool is returned, freight prepaid to ITM or one of it’s authorised service
agents as directed by ITM, and is found to have a material or constructional defect.
• The machine or tool has not been subject to misuse, neglect or damage by accident.
• The fault is not a result of normal “wear and tear”.
• Written permission has been received from ITM prior to commencement of repair.
• Repairs, tampering or modification carried out by unauthorised personnel will void all warranty.
• Consumable items such as cutting tools, pilot pins, saw blades, grinding wheels etc. are NOT
covered by warranty.
Our goods come with guarantees which cannot be excluded under the Australian Consumer Law.
You are entitled to replacement or refund for a major failure and to compensation for other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
CONTENTS
1. GENERAL INFORMATION 3
1.1. Application 3
1.2. Technical data 3
1.3. Design 5
1.4. Equioment included 5
2. SAFETY PRECAUTIONS 6
3. STARTUP AND OPERATION 8
3.1. Adjusting the bevel angle and width 8
3.2. Operating 9
3.3. Replacing the cutting inserts 11
3.4. Replacing the milling cutters 12
4. ACCESSORIES 13
4.1. 0° guide set for facing plates 13
4.2. Guides for bevelling pipes 14
5. WIRING DIAGRAM 16
6. SPARE AND WEARING PARTS 17
7. PARTS BREAKDOWN 18
To Next Page
Loading...