EasyManua.ls Logo

Trane Technologies 4TCC4048E1000A User Manual

Default Icon
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2022 1188--EEBB3399DD11--11AA--EENN
Single Packaged Cooling/Electric Heat
13.4 SEER2 Convertible, 2 5 Ton
4TCC4024E1000A
4TCC4030E1000A
4TCC4036E1000A
4TCC4042E1000A
4TCC4048E1000A
4TCC4060E1000A
NNoottee:: “Graphics in this document are for representation only. Actual
model may differ in appearance.”
NNoottee:: “Unit specific Service Facts available online.”
Installation and Operations Manual
Question and Answer IconNeed help?

Do you have a question about the Trane Technologies 4TCC4048E1000A and is the answer not in the manual?

Trane Technologies 4TCC4048E1000A Specifications

General IconGeneral
Cooling Capacity (BTU)48000
SEER14
HSPF8.2
Heating Capacity (BTU)48000
RefrigerantR-410A
Voltage208/230
Phase1
Cooling Capacity (Tons)4
Heating Capacity (Tons)4
StagesSingle

Summary

Safety Section

Electrical and Refrigerant Safety

Covers electrical hazards, grounding, and R-410A refrigerant safety precautions.

Operational Safety Hazards

Addresses risks associated with operating the unit without proper panel installation.

Charging in Cooling above 55°F OD Ambient

Charging Procedure

Detailed steps for charging the system in cooling mode based on ambient temperature.

Determine Unit Clearances

Unit Installation

Lifting and Rigging

Critical warnings and guidelines for safely lifting and rigging the unit to prevent damage or injury.

Electrical Wiring

Power Wiring

Instructions for running power supply lines through conduit and connecting them to the unit.

Control Wiring

Unit Startup

Pre-Start Quick Checklist

A comprehensive checklist to ensure all installation steps are completed before unit startup.

Starting the Unit

Procedures for starting the unit in both cooling and heating modes.

Sequence of Operation

Detailed explanation of how the unit operates in cooling, heating, and defrost cycles.

Maintenance

Refrigerant Circuits

Troubleshooting Chart

Related product manuals