12
VAV-SVX08U-EN
Digit 12, 13, 14, 15 — Controls
(continued)
SY77 = Symbio 210 DDC -Basic (Water heat
-N.O.- 2 position)
SY83 = Symbio 210 DDC- Basic plus- Local
(Electric heat- PWM) Remote (Staged)
SY84 = Symbio 210 DDC- Basic plus- Local
(Water heat- Modulating) Remote (Water-
N.C. 2-position)
SY85 = Symbio 210 DDC- Basic plus- Local
(Water heat- Modulating) Remote (Water-
N.O. 2-position)
SY86 = Symbio 210 DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- Modulating)
SY87 = Symbio 210 DDC- Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- Modulating)
SY88 = Symbio 210 DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- N.O. 2-position)
SY89 = Symbio 210 DDC-Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- N.C. 2-position)
SY90 = Symbio 210 DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- N.C. 2-position)
SY91 = Symbio 210 DDC- Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- N.O. 2-position)
SY92 = Symbio 210 DDC- Basic plus- Local
(Electric heat- Staged) Remote (Staged)
SY95 = Symbio 210 DDC - Control with
Modulating SCR
SY96 = Symbio 210 DDC - Space Temp
Control with Local SCR and Remote Staged
Electric heat
SE71 = Symbio 210e DDC - Basic (Cooling
only)
SE72 = Symbio 210e DDC - Basic (Water
heat- N.C.- 2 position)
SE73 = Symbio 210e DDC - Basic (Water
heat- Modulating)
SE74 = Symbio 210e DDC - Basic (Electric
heat-staged)
SE75 = Symbio 210e DDC - Basic (Electric
heat-PWM)
SE77 = Symbio 210e DDC -Basic (Water heat
-N.O.- 2 position)
SE83 = Symbio 210 DDC- Basic plus- Local
(Electric heat- PWM) Remote (Staged)
SE84 = Symbio 210e DDC- Basic plus- Local
(Water heat- Modulating) Remote (Water-
N.C. 2-position)
SE85 = Symbio 210e DDC- Basic plus- Local
(Water heat- Modulating) Remote (Water-
N.O. 2-position)
Digit 12, 13, 14, 15 — Controls
(continued)
SE86 = Symbio 210e DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- Modulating)
SE87 = Symbio 210e DDC- Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- Modulating)
SE88 = Symbio 210e DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- N.O. 2-position)
SE89 = Symbio 210e DDC-Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- N.C. 2-position)
SE90 = Symbio 210e DDC- Basic plus- Local
(Water heat- N.O. 2-position) Remote
(Water- N.C. 2-position)
SE91 = Symbio 210e DDC- Basic plus- Local
(Water heat- N.C. 2-position) Remote
(Water- N.O. 2-position)
SE92 = Symbio 210e DDC- Basic plus- Local
(Electric heat- Staged) Remote (Staged)
SE95 = Symbio 210e DDC - Control with
Modulating SCR
SE96 = Symbio 210e DDC - Space Temp
Control with Local SCR and Remote Staged
Electric heat
Digit 16 — Insulation
A = 1/2” Matte-faced
B = 1” Matte-faced
D = 1” Foil-faced
F = 1” Double Wall
G = 3/8” Closed-cell
Digit 17— Motor Type
D = PSC Motor
E = High-efficiency Electronically
Commutated Motor (ECM)
F = Variable Speed High-efficiency
Electronically Commutated Motor (ECV)
Digit 18— Motor Voltage
1 = 115/60/1
2 = 277/60/1
3 = 347/60/1
4 = 208/60/1
5 = 230/50/1
Digit 19— Outlet Connection
1 = Flanged
2 = Slip–and-Drive Connection
Digit 20— Attenuator
0 = None
B = Suppressor
T = Thinline Suppressor
Digit 21— Water Coil
0 = None
1 = 1 Row, Plenum Inlet Installed RH
2 = 2 Row, Plenum Inlet Installed RH
3 = 1 Row, Discharge Installed LH
4 = 1 Row, Discharge Installed RH
5 = 2 Row, Discharge Installed LH
6 = 2 Row, Discharge Installed RH
A = 1 Row Premium, Water Coil Inlet
B = 2 Row Premium, Water Coil Inlet
C = 1 Row Premium, Hot Coil on Discharge LH
D = 1 Row Premium, Hot Coil on Discharge
RH
E = 2 Row Premium, Hot Coil on Discharge LH
F = 2 Row Premium, Hot Coil on Discharge RH
Digit 22— Electrical Connections
F = Flippable Left and Right Hand
L = Left, Airflow hits in face
R = Right, Airflow hits in face
W = Narrow Corridor LH, High Voltage, Inlet
Facing
X = Narrow Corridor RH, High Voltage, Inlet
Facing
Note: Digits W and X, fan-powered series
only.
Digit 23— Transformer
0 = Not Applicable
Digit 24 — Disconnect Switch
0 = None
W = With
Note: Electric reheat w/door interlocking
power disconnect, cooling only and
water reheat w/toggle disconnect.
Digit 25 — Power Fuse
0 = None
W = With
Digit 26 — Electric Heat Voltage
0 = None
A = 208/60/1
B = 208/60/3
C = 240/60/1
D = 277/60/1
E = 480/60/1
F = 480/60/3
G = 347/60/1
H = 575/60/3
J = 380/50/3
K = 120/60/1
Note: Digit K not available wit low height.
MMooddeell NNuummbbeerrss
To Next Page
Loading...
