CGAD-SVN02C-EN2
Important Notice
Refrigerant Emission Control
The conservation and reduction of gas
emissions should be reached by following
the operational and service procedures
recommended by Trane, with special
attention to the following:
The refrigerant used in any type of air-
conditioning equipment should be
recuperated and/or recycled to be used
again, captured or completely destroyed
whenever it is removed from the
equipment. It should never be released
into the atmosphere.
Always consider the possibility of recycling
or reprocessing the refrigerant transferred
before beginning the recuperation by any
method. Questions about recuperated
refrigerants and acceptable qualities are
described in norm ARI 700.
Use approved and safe cylinders. Comply
with all the applicable safety and
transportation norms when transporting
the refrigerant containers.
In order to minimize emissions when
transferring the refrigerant gas, use
recycling equipment. Always use methods
that make the lowest vacuum possible
when recuperating and condensing the
refrigerant inside the cylinder.
Important:
Since Trane do Brasil has continual development of its products as a policy, it reserves the right to
change its specifications and drawings without prior notice. The installation and maintenance of the
equipment specified in this manual should be done by qualified technicians and/or technicians
approved by Trane. The lack of following and/or adopting the procedures presented in this manual
could imply in the product losing its warranty.
IMPORTANT:
Dimensional measuring units on this
catalog are on milimitres (mm). (Exept
for those locally referencied).
To Next Page
Loading...