CLCH-SVX03C-EN 31
Installation - Mechanical
5. Use a bar clamp or come-along to compress the gasketing and pull the modules together.
6. Install the brackets as shown in Figure 22, inserting the appropriate screws using a powered
impact gun and taking care not to strip the bolts.
Note: Be sure to compress the gasketing to avoid excessive air leakage.
Figure 22. Bracket installation
#10 Self-drilling screws
on 8-in. centers
SCR01789
0.25-in. self-drilling screw
SCR01369
0.31-in. self-
tapping screw
SCR01454
Flat bracket
BRK03008
0.31-in. self-
tapping screw
SCR01874
Saddle bracket
BRK03007
0.31-in. self-
tapping screw
SCR01454
0.31-in. self-
tapping screw
SCR01454
Gasket
GKT03870
0.31-in. self-
tapping screw
SCR01454
Saddle bracket
BRK03007
Saddle bracket
BRK03007
Center bracket
BRK01418
Center bracket
BRK01418
Gasket
GKT03870
0.25-in. self-
drilling screw
SCR01369
If >50 in. add
center bracket
To Next Page
Loading...
