EasyManua.ls Logo

Trane CONQUEST CGAX 015 - Page 12

Trane CONQUEST CGAX 015
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CG-SVX027D-GB
12
4 UNT-PRC002-GB
Technical Data
FWD 08 12 20 30 45
Power supply (V/Ph/Hz) 230/1/50
Capacities
Cooling capacity on water (1) (kW) 5,2 8,3 15 18,8 30,1
Heating capacity on water (2) (kW) 6,3 11,9 18,9 20,9 38,2
Fan motor (type) 2 x direct drive centrifugal
Fan power input (3) (kW) 0,23 0,46 0,65 1,04 1,51
Current amps (3) (A) 1,1 2,2 3,1 4,7 5,5
Start-up amps (A) 3,2 5,5 9,3 14,1 16,5
Air flow
minimum (m
3
/h) 490 980 1400 1800 2700
nominal (m
3
/h) 820 1650 2300 3000 4500
maximum (m
3
/h) 980 1970 2600 3600 5400
Main coil
Water entering/leaving connections (type) ISO R7 rotating female
(Dia) 3/4" 3/4" 1 1/2" 1 1/2" 1 1/2"
Electric heater (accessory for blower only)
Electric power supply (V/Ph/Hz) 230/1/50 230/1/50 or 400/3/50 400/3/50 400/3/50 400/3/50
Heating capacity (kW) 2/4 8 10 12 12
Hot water coil (accessory for blower only)
Heating capacity (4) (kW) 6,3 12 17,4 22,4 34,5
G2 filter (filter box accessory)
Quantity 2 2 2 2 2
Dimensions ( LxWxth) (mm) 386x221x8 486x271x8 586x321x8 586*421*8 586*621*8
G4 filter (filter box accessory)
Quantity - 2 2 2 2
Dimensions ( LxWxth) (mm) - 486x264x48 586x314x48 586*414*48 586*614*48
Condensate pump (accessory) (type) Centrifugal
Water flow - lift height (l/h - mm) 24 - 500
Not available for FWD30 and FWD45
Sound level (L/M/H speed)
Sound pressure level (5) (dB(A)) 36/40/43 38/41/44 46/50/53 47/52/57 47/52/58
Sound power level (5) (dB(A)) 46/50/53 48/51/54 56/60/63 57/62/67 57/62/68
Unit dimensions
Width x Depth (mm) 890 x 600 1090 x 710 1290 x 820 1290 x 970 1290 x 1090
Height (mm) 250 300 350 450 650
Shipped unit dimensions
Width x Depth (mm) 933 x 644 1133 x 754 1333 x 864 1333 x 1008 1333*1133
Height (mm) 260 310 360 460 660
Weight (kg) 32 46 61 76 118
Colour galvanised steel
Recommended fuse size
Unit alone (aM/gI) (A) 8/16 8/16 8/16 8/25 8/25
Unit with electric heater (gI) (A) 16 (2kW),25 (4kW) 40 (230V),3*16 (400V) 3*20 3*25 3*25
(1) Conditions: Water entering/leaving temperature: 7/12 °C, Air inlet temperature 27/19°C DB/WB - Nominal air flow
(2) Conditions: Water entering/leaving temperature: 50/45 °C, Air inlet temperature 20°C DB - Nominal air flow
(3) At high speed with nominal air flow.
(4) Water entering/leaving temperature 90/70 °C, air inlet temperature 20 °C DB, Nominal air flow.
(5) A rectangular glass wool duct 1m50 long is placed on the blower.The measurement is taken in the room containing the blower unit.
Heat exchanger operating limits:
FWD:
*water temperature: max 100° C
*absolute service pressure: min 1 bar/max 11 bars
Accessories - Hot water coil:
*water temperature: min. +2° C/max. 100° C
*absolute service pressure: min 1 bar/max 11 bars
General Data
Table 1 - CGAX 039-060 General Data
CGAX
039
SE-SN
CGAX
045
SE-SN
CGAX
035
SE-SN
CGAX
040
SE-SN
CGAX
046
SE-SN
CGAX
052
SE-SN
CGAX
060
SE-SN
Net Cooling Capacity (1) (kW) 111 127 97 116 129 147 164
Total Power input in cooling (1) (kW) 38 41 35 39 47 51 58
Unit electrical data (2) (3) (4)
Short Circuit Unit Capacity (9) (kA) 15 15 15 15 15 15 15
Power Cable Cross Section (max) mm² 150 150 150 150 150 150 150
Disconnect switch size (A) 250 250 250 250 250 250 250
Digit 12=2 or Digit 12=1 and Digit 41=2
Maximum Power input (kW) 51.1 58.7 46.4 55.8 63.3 70.7 78.2
Unit rated amps (A) 82.6 98.2 78.1 93.5 103.7 113.9 130.7
Unit start up amps (w/o soft starter - Digit 26=A) (4) (A) 215.3 223.7 199.9 215.3 236.4 246.6 256.2
Unit start up amps (with soft starter - Digit 26=B) (4) 152.1 161.7 143.1 158.5 173.2 183.4 194.2
Power factor 0.901 0.870 0.866 0.870 0.888 0.902 0.870
Digit 12=1 and Digit 15=A
Maximum Power input (kW) 49.0 55.5 44.2 51.6 59.0 66.5 74.0
Unit rated amps (A) 81.0 95.8 76.5 90.4 100.6 110.8 127.6
Unit start up amps (w/o soft starter - Digit 26=A) (4) (A) 213.7 221.3 198.3 212.2 233.3 243.5 253.1
Unit start up amps (with soft starter - Digit 26=B) (4) 150.5 159.3 141.5 155.4 170.1 180.3 191.1
Power factor 0.886 0.847 0.846 0.836 0.861 0.880 0.847
Digit 12=1 and Digit 15=C
Maximum Power input (kW) 50.0 56.6 46.4 53.7 61.2 68.6 76.1
Unit rated amps (A) 81.8 96.6 78.1 91.9 102.1 112.3 129.1
Unit start up amps (w/o soft starter - Digit 26=A) (4) (A) 214.5 222.1 199.9 213.7 234.8 245.0 254.6
Unit start up amps (with soft starter - Digit 26=B) (4) 151.3 160.1 143.1 156.9 171.6 181.8 192.6
Power factor 0.894 0.855 0.866 0.854 0.875 0.892 0.859
Compressor
Compressor Number per Circuit # 3 3 2 2 2 2 2
Type Scroll Scroll Scroll Scroll Scroll Scroll Scroll
Model Circuit1 / Circuit 2 13+13+13 15+15+15
7,5+10 /
7,5+10
10+10 /
10+10
10+13
/10+13
13+13 /
13+13
15+15 /
15+15
Max Compr Power input Circuit 1/Circuit 2 kW
15,7 +
15,7 + 15,7
17,6 +
17,6 + 17,6
9,2 + 12 /
9,2 + 12
12 + 12 /
12 + 12
12 + 15,7 /
12 + 15,7
15,7 + 15,7 /
15,7 + 15,7
17,6 + 17,6 /
17,6 + 17,6
Rated Amps Circuit1 / Circuit 2 (4) (A)
25,3 +
25,3 + 25,3
29,5 +
29,5 + 29,5
15,5 + 20,2 /
15,5 + 20,2
20,2 + 20,2 /
20,2 + 20,2
20,2 + 25,3 /
20,2 + 25,3
25,3 + 25,3 /
25,3 + 25,3
29,5 + 29,5 /
29,5 + 29,5
Locked Rotor Amps Circuit1 / Circuit 2 (4) (A)
158 +
158 + 158
155 +
155 + 155
98 + 142 /
98 + 142
142 + 142 /
142 + 142
142 + 158 /
142 + 158
158 + 158 /
158 + 158
155 + 155 /
155 + 155
Motor RPM (rpm) 2900 2900 2900 2900 2900 2900 2900
Oil sump heater Circuit1 / Circuit 2 (W) 0,25 / 0 0,25 / 0 0,17 / 0,17 0,17 / 0,17 0,17 / 0,17 0,17 / 0,17 0,17 / 0,17
Evaporator
Quantity # 1 1 1 1 1 1 1
Type Stainless steel Copper Brazed plate Heat exchanger
Evaporator model P120Tx104 P120Tx104 DP300x82 DP300x82 DP300x82 DP300x114 DP300x114
Evaporator Water Content volume (l) 12.5 12.5 8.5 8.5 8.5 11.8 11.8
Nominal water connection size
(Grooved coupling) - Without HYM
(in) -
(mm)
2" - 60,3 2" - 60,3 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1
Nominal water connection size
(Grooved coupling) - With HYM
(in) -
(mm)
3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1 3" OD - 76,1
Hydraulic Module Components
Single pump - Standard head pressure option
Max available Head Pressure (kPa) 131 104 111 133 114 113 178
Motor Power (kW) 2.30 2.30 1.50 2.30 2.30 2.30 2.30
Rated Amps (A) 5.03 5.03 3.50 5.03 5.03 5.03 5.03
Single pump - High head pressure option
Max available Head Pressure (kPa) 176 151 198 179 162 162 138
Motor Power (kW) 3.00 3.00 3.00 3.00 3.00 3.00 3.00
Rated Amps (A) 6.23 6.23 6.23 6.23 6.23 6.23 6.23
Twin pump - Standard head pressure option
Max available Head Pressure (kPa) 131 104 111 133 114 113 178
Motor Power (kW) 2.30 2.30 1.50 2.30 2.30 2.30 2.30
Rated Amps (A) 5.03 5.03 3.50 5.03 5.03 5.03 5.03
Twin pump - High head pressure option
Max available Head Pressure (kPa) 176 151 198 179 162 162 138
Motor Power (kW) 3.00 3.00 3.00 3.00 3.00 3.00 3.00
Rated Amps (A) 6.23 6.23 6.23 6.23 6.23 6.23 6.23
Expansion Tank Volume (l) 35 35 35 35 35 35 35
Max User water loop Volume for factory mounted
expansion tank (1)
(l) 2000 2000 2000 2000 2000 2000 2000
Optionnal water Buffer tank volume (l) 444 444 444 444 444 444 444
Antifreeze Heater without pump package (W) 180 180 120 120 120 180 180
Antifreeze Heater with pump package (W) 340 340 280 280 280 340 340
Condenser
Type Full aluminum Micro channel heat exchanger
Quantity of coil # 2 2 2 2 2 2 2
Face area per circuit (m²) 5.93 5.93 2.23 2.96 2.96 2.96 2.96

Related product manuals