Trane CXAU - Page 49

Maintenance
49PKGP-SVX19A-EN
Name and Content of Hazardous Substances in the Product
Part Hazardous Substances
(Pb) (Hg) (Cd) Cr(VI) (PBB) (PBDE)
Motor × ○ × ○ ○ ○
Heat Exchanger ○ ○ ○ ○ ○ ○
Filter ○ ○ ○ ○ ○ ○
Fasteners such as screws and bolts ○ ○ ○ ○ ○ ○
Sheet metal ○ ○ ○ ○ ○ ○
Thermal insulation, damping block class ○ ○ ○ ○ ○ ○
Plastic parts ○ ○ ○ ○ ○ ○
Foam parts ○ ○ ○ ○ ○ ○
Rubber parts ○ ○ ○ ○ ○ ○
Power cords and cables × ○ ○ ○ ○ ○
Printed circuit boards and electrical
components
× ○ × ○ ○ ○
Printed copy ○ ○ ○ ○ ○ ○
Controller parts (controller / battery, etc.)* × ○ × ○ ○ ○
Other sealing parts ○ ○ ○ ○ ○ ○
Other imprints ○ ○ ○ ○ ○ ○
This form has been prepared in accordance with SJ/T 11364.
○ : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specied in GB/T 26572.
× : Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirements specied in GB/
T 26572. However, with the existing technical conditions, it is temporarily impossible to realize that the product parts do not contain the above harmful substances
at all. The content of harmful substances will be gradually reduced with the advancement of alternative technology.