Trane FC - Page 16

16 UNT-SVX07A-EN
Installation
dimensions
& weights
Vertical Recessed Unit Dimensions, in-lbs.
unit
size 02-03 04 06 08 10-12
A 2’-8
11
/16” 3’-1
11
/16” 3’-11
3
/16” 4’-7
11
/16” 6’-2
11
/16”
B 1’-9
5
/16” 2’-2
5
/16” 2’-11
13
/16” 3’-8
5
/16” 5’-3
5
/16”
C 1’-10
13
/16” 2’-3
13
/16” 3’-1
5
/16” 3’-9
13
/16” 5’-4
13
/16”
D 1’-5
5
/16” 1’-10
5
/16” 2’-7
13
/16” 3’-4
5
/16” 4’-11
5
/16”
E 3’-11” 4’-3” 5’-3” 5’-5
1
/2” 7’-5
1
/2”
F 2’-6” 2’-6” 2’-6” 2’-9
1
/2” 2’-9
1
/2”
G2
3
/8”2
3
/8”2
3
/8”4
1
/8”4
1
/8”
H 3’-6” 4’-0” 4’-9” 5’-3” 7’-3”
J 2’-2
1
/2” 2’-2
1
/2” 2’-2
1
/2” 2’-3
1
/2” 2’-3
1
/2”
operating weight 78 88 128 139 253
shipping weight 68 78 118 129 243
Notes:
1. Coil connections are always on the drain pan side and opposite the control
box.
2. Coil connections are
5
/8” O.D. sweat. See pages 21-22 for locations.
3. All duct collar dimensions are to the outside of the collar.
4. See pages 23-24 for fresh air opening dimensions.
5. Dimension 'G' refers to the required minimum distance between the finished
floor, and the bottom of the unit.
Vertical Recessed, Model H