Trane Force-Flo - Page 27

Controls
CAB-PRC001-EN 27
zone sensor
options
Zone Sensor Options
Zone sensors are available as either unit,
wall, or split-mounted options for design
flexibility. Force-Flo units with the unit-
mounted zone sensor option include a
thermistor in the unit’s return air path.
Wall-mounted zone sensor options have
an internal thermistor. Zone sensors
operate on 24 VAC.
Tracer ZN510 and ZN520 Options
Unit-mounted zone sensor: digit 30 = E
and digit 31 = V
Wall-mounted zone sensor: digit 30 = E
and digit 31 = W
Split-mounted zone sensor, unit-mounted
fan mode and wall-mounted setpoint dial:
digit 30 = E and digit 31 = X
Split-mounted zone sensor, unit-mounted
fan mode and wall-mounted setpoint dial:
digit 30 = F or G and digit 31 = Y
Unit-mounted zone sensor: digit 30 = F
or G and digit 31 = Z
Wall-mounted zone sensor: digit 30 = F or
G and digit 31 = 2
Wall-mounted zone sensor: digit 30 = F or
G and digit 31 = 1
Tracer ZN010 Options