Trane HORIZON ABDA - Operator Settings Configuration; Chilled Water Setpoints and Purge Control; Purge Operating Mode: (Mode)

34
Operator
Settings
G
Chilled Water Setpoints and Purge Control
Press (Next) (Previous) to Continue
Settings in this Menu are (Status)
(Password Message)
Purge Operating Mode: (Mode)
Press (+) (-) to Change Setting
Current time/Date HH:MM xm Mon,
xx xxxx
(Enter) to Change: (Next ) to Continue
Current Time/Date HH:MM xm Mon
xx, xxxx
To Change Hour, Press (+) (-) and Enter
Current Time/Date HH:MM xm Mon
xx, xxxx
To Change Minute, Press (+) (-) and Enter
Current Time/Date HH:MM xm Mon
xx, xxxx
To Change Month, Press (+) (-) and Enter
Current Time/Date HH:MM xm Mon
xx, xxxx
To Change Day, Press (+) (-) and Enter
Current Time/Date HH:MM xm Mon
xx, xxxx
To Change Year, Press (+) (-) and Enter
Front Panel Chiller Water Setpoint:
xxx.x F/C
Press (+) (-) to Change Setting
(Default) Chilled Water Setpoint
Source:
(Source)
Chilled Water Reset Type:
(type)
Press (+) (-) to Change Setting
(Type) Reset Ratio: xxx%
Press (+) (-) to Change Setting
(Type) Start Reset Setpoint: xxx.x F
Press (+) (-) to Change Setting
(Type) Maximum Reset Setpoint: xxx.x F
Press (+) (-) to Change Setting
Chilled Water Flow Pretest: D/E
Press (+) (-) to Change Setting
Front Panel Hot Water Setpoing: xxx.x F/C
Press (+) (-) to Change Setting
(Deftault) Hot Water Setpoint Source:
(Source)
Hot Water Reset Type: (Type)
Press (+) (-) to Change Setting
(Type) Hot Water Reset Ratio: xxx %
Press (+) (-) to Change Setting
(Type) Hot Water Start Reset Setpoint:
xxx.x F
Press (+) (-) to Change Setting
(Type) Hot Water Maximum Reset Setpoint:
xxx.x F
Press (+) (-) to Change Setting
Unit Function: (Cool/heat)
Press (+) (-) to Change Setting
(Default) Priority Setpoint Source:
(Source)
Front Panel Fuel Select: (Type)
Press (+) (-) to Change Setting
(Default) Fuel Select Setpoint Source:
(Source)
Setpoint Source Override:
(Source)