Trane LIFT 162-P-1204-P

To Next Page

To Previous Page

Press the ENTER key.

Press the ESC key to exit.

All software contents will appear translated in the language selected.

7.3.2

Date and time

The adjustment must be made while the machine is off.

Press the ENTER key to access the main menu.

7.3.3

Set-point

From control panel it is possible to set the water temperature value (outlet water).

Press the ENTER key to access the main menu.

Select the clock menu.

Press the ENTER key.

Select the parameter menu.

Press the ENTER key.

Select Set RTC menu and push the ENTER button.

Select the adjustment menu.

Press the ENTER key.

Using the control panel arrows, move the cursor on the value to modify.

Press the ENTER key.

Select the Setpoint menu.

Press the ENTER key.

Modify the value by using UP and DOWN buttons.

Trane LIFT 162-P-1204-P - Page 21