Electrical control wiring
DIP for address of the indoor unit
Different indoor units are identifi ed according to different DIP switches for address of the indoor unit.
The address DIP must be different (in case of being identical, a failure of address confl ict will be
incurred).
There are 8 DIP switches on the control panel of the indoor unit, of which S5, S6, and S7 are for
address, and their settings are as shown in following table:
S5 S6 S7 Address of indoor unit
000 0
001 1
010 2
011 3
100 4
101 5
110 6
111 7
Shift selection for fan speed of the indoor unit
There are 8 DIP switches on the control panel of the indoor unit, of which S8 is for shift selection of
fan speed. When the DIP is Đ0đ, three high shifts are selected, namely, high, medium and low; if
being Đ1đ, select three low shifts, namely, medium, low and Ultra-low.
Fan speed shift of indoor unit Three high shifts Three low shifts
Fan speed shift S7 of indoor unit 0 1
Fan speed of indoor unit High, medium, low Medium, low, Ultra-low
AMS-SVX04A-EN 21
To Next Page
Loading...
