SS-SVX001A-EN
21
Installation
Refrigerant Piping Guidelines
Figure 13. Allowable elevation difference: TTA above indoor unit
Contact manufacturer for review
Figure 14. Allowable elevation difference: TTA or TWA below indoor unit
Acceptable liquid-riser height
based on total liquid-line length
(below indoor unit)
Contact manufacturer for review
NNoottee:: Route refrigerant piping for minimum linear length, minimum number of bends and fittings.
IImmppoorrttaanntt:: Read Application Guide SS-APG008*–EN
thoroughly before installing this unit.
To Next Page
Loading...