5
RTAA-IOM-3
37 Figure 18
Spring Isolator Placement for
Typical RTAA Packaged Unit
- 130 to 200 Tons
38 Figure 19
Spring Isolator Placement for
Typical RTAA Packaged Unit
-240 to 400 Tons
39 Figure 20
Spring Isolator Placement for
Typical RTAA Outdoor Unit with
Remote Evaporator Option
40 Figure 21
Spring Isolator Placement for
Typical RTAA Unit with Heat
Recovery Domestic Water Heater
41 Figure 22
Suggested Piping for Typical RTAA
Evaporator
43 Figure 23
RTAA 130 thru 400 Evaporator
Water Pressure Drop
46 Figure 24
Typical Domestic Water Heater
Piping
46 Figure 25
RTAA 130 thru 400 Domestic
Water Heater Water Pressure Drop
47 Figure 26
Remote Evaporator Installation -
No Elevation Difference
48 Figure 27
Remote Evaporator Installation -
Condenser and Compressor above
Evaporator
49 Figure 28
Restricted Installation -Evaporator
is More Than 1’8" Above Base of
Outdoor Unit.
49 Figure 29
Restricted Installation -Suction
Line is on a Higher Plane than the
Outdoor Unit.
50 Figure 30
Refrigerant Circuit Identification
52 Figure 31
Remote Evaporator Piping
Example
55 Figure 32
Customer Interconnect Wiring for
RTAA Outdoor Unit with Remote
Evaporator -130 to 200 Tons
57 Figure 33
Warning Label
58 Figure 34
Typical Field Wiring for RTAA
Packaged Unit - 130 to 200 Tons
61 Figure 35
Typical Field Wiring for RTAA
Packaged Unit - 240 to 400 Tons
List of
Illustrations
11 Figure 1
Typical RTAA Packaged Unit -
130 to 200 Tons (Front/side
Exterior View)
12 Figure 2
Typical RTAA Packaged Unit -
130 to 200 Tons (Rear/side Exterior
View)
13 Figure 3
Typical RTAA Packaged Unit -
240 to 400 Tons (Front/side
Exterior View)
14 Figure 4
Typical RTAA Unit (Rear Exterior
View)
15 Figure 5
Typical RTAA Unit with Remote
Evaporator Option (Rear Exterior
View)
18 Figure 6
Remote Evaporator
21 Figure 7
Nameplates
22 Figure 8
Model Number Coding System
26 Figure 9
Dimensions and Clearances for
RTAA Packaged Unit
- 130 to 200 Tons
27 Figure 10
Dimensions and Clearances for
RTAA Packaged Unit
- 240 to 300 Tons
28 Figure 11
Dimensions and Clearances for
RTAA Packaged Unit
- 340 to 400 Tons
29 Figure 12
Dimensions and Clearances for
RTAA Outdoor Unit with Remote
Evaporator Option
30 Figure 13
Dimensions and Weights for
Remote Evaporator
33 Figure 14
Rigging and Lifting Weights for
RTAA Packaged Unit
- 130 to 200 Tons Including
Domestic Water Heater
34 Figure 15
Rigging and Lifting Weights for
RTAA Packaged Unit
- 240 to 300 Tons
34 Figure 16
Rigging and Lifting Weights for
RTAA Packaged Unit
- 340 to 400 Tons
35 Figure 17
Rigging and Lifting Weights for
RTAA Outdoor Unit with Remote
Evaporator Option
To Next Page
Loading...
Need help?
General
