To Next PageTo Next Page
Need help?Do you have a question about the Trane S9V2B060U4PSBC and is the answer not in the manual?
General| Model Number | S9V2B060U4PSBC |
|---|---|
| Category | Furnace |
| Annual Fuel Utilization Efficiency (AFUE) | 96% |
| Heating Capacity | 60, 000 BTU/h |
| Input BTU/h | 60, 000 BTU/h |
| Blower Motor | Variable Speed |
| Fuel Type | Natural Gas |
| Warranty | 10 Years |
| Stages | 2-Stage |
| Ignition Type | Hot Surface Ignition |
Covers risks of fire or explosion due to improper operation or storage of flammable materials.
Warns about explosion risks and recommends gas leak detection devices for safety.
Highlights dangers of electrical shock, fire, or explosion from improper servicing.
Emphasizes risks of carbon monoxide poisoning due to improper venting or parts.
Warns about fire risks, particularly regarding furnace placement on combustible flooring.
Stresses the importance of following venting system instructions to prevent carbon monoxide leaks.
Warns against connecting furnace line voltage to a GFCI protected circuit to prevent property damage.
Details safety risks related to vent termination locations and condensate management.
Outlines essential safety practices for furnace installation, servicing, and operation.
Details required clearances to combustible materials and specific location requirements for furnace installation.
Outlines air supply requirements for confined spaces, including minimum free area calculations.
Diagrams illustrating field wiring for thermostats and outdoor units for various furnace configurations.
Checks to perform before starting up the furnace, including duct, filter, and venting verification.
Provides a comprehensive list and explanation of alarm and error codes for the IFC.
Details steps to view, clear, and recover from fault codes on the IFC.
Step-by-step operational sequence for 1st stage gas heating mode.
Detailed operational sequence for 2nd stage gas heating mode.
