Trane S9V2B080D4PSBC/D User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
July 2022
SS99VV22--SSVVXX000011--11AA--EENN
Upflow/Horizontal and Dedicated Downflow
Gas-Fired, Direct/Non-Direct Vent, 2-Stage
Condensing Variable Speed Furnaces
UUppffllooww,, CCoonnvveerrttiibbllee ttoo
HHoorriizzoonnttaall RRiigghhtt oorr
HHoorriizzoonnttaall LLeefftt
S9V2B040U3PSBC/D
S9V2B060U4PSBC/D
S9V2B080U4PSBC/D
S9V2C080U5PSBC/D
S9V2C100U5PSBC/D
S9V2D120U5PSBC/D
DDoowwnnffllooww OOnnllyy
S9V2B040D3PSBC/D
S9V2B060D3PSBC/D
S9V2B080D4PSBC/D
S9V2C100D5PSBC/D
S9V2D120D5PSBC/D
NNoottee:: Graphics in this document are for
representation only. Actual
model may differ in appearance.
CAUTION
!
Failure to follow this Caution could result in property damage or personal injury. 4GXC* and
4MXC* coils installed on upflow furnaces in vertical, horizontal left, or horizontal right
orientations without a factory installed metal drain pan shield must use a MAY*FERCOLKITAA
kit. Coils installed on upflow furnaces must have drain pans that are suitable for 400° F
(205°C) or have a metal drain pan shield. Downflow furnaces do not require a metal drain pan
shield or the use of the MAY*FERCOLKITAA kit.
COIL REQUIREMENT!
Installation, Operation, and Maintenance

Trane S9V2B080D4PSBC/D Specifications

General

Brand	Trane
Model	S9V2B080D4PSBC/D
Category	Furnace
Language	English

Summary

Installation, Operation, and Maintenance

Safety Information

Crucial safety warnings and precautions for furnace installation, operation, and servicing.

Product Specifications and Accessories

Details technical specifications, available accessories, and part lists for the furnace.

Furnace Installation Guidelines

General guidelines, practices, and requirements for furnace installation.

Safety Practices and Precautions

Outlines essential safety practices for installation, servicing, and operation.

General Guidelines

Covers general responsibilities, codes, and recommendations for installation.

Locations and Clearances

Details required clearances and location considerations for furnace installation.

Gas Piping

Procedures and requirements for connecting gas piping to the furnace.

Venting Requirements

Essential guidelines for proper venting of combustion gases.

Duct Connections

Guidelines for connecting supply and return air duct systems to the furnace.

Electrical Connections

Instructions for making proper electrical connections and field wiring for the furnace.

Condensate Drain Instructions

Procedures for installing and managing condensate drain systems.

Combustion Air and Venting Options

Instructions for different combustion air exhaust and venting configurations.

Furnace Controls and Operation

Details the Integrated Furnace Control (IFC), start-up, sequence, and test modes.

Integrated Furnace Control Menu

Information on navigating and using the Integrated Furnace Control (IFC) menu and features.

Run Test Mode

Instructions for entering and using the furnace's run test mode for diagnostics.

Troubleshooting and Servicing

Comprehensive guide to diagnosing issues, fault codes, and periodic maintenance requirements.

Troubleshooting Guide

Step-by-step troubleshooting guides for various fault codes indicated by the IFC.

Periodic Servicing Requirements

Annual and regular maintenance tasks to ensure optimal furnace performance and longevity.