Need help?Do you have a question about the Trane TAM4A0C60S51SB and is the answer not in the manual?
General| Model | TAM4A0C60S51SB |
|---|---|
| Type | Air Handler |
| Cooling Capacity | 5 tons |
| Refrigerant | R-410A |
| Nominal CFM | 2000 |
| Voltage | 208/230V |
| Phase | 1 |
| Heating Capacity | 60, 000 BTU/h |
| Insulation | Foil-faced |
Key warnings regarding safety, hazards, and required precautions for equipment operation.
Emphasizes critical safety and code compliance for field wiring installation and grounding.
Covers safe procedures and considerations for lifting and rigging air handler units and sections.
Outlines requirements for seismic-compliant installation, including anchor specifications.
Emphasizes the necessity of qualified personnel for safe and compliant field wiring and grounding.
A comprehensive checklist to complete before operating the unit for the first time.
Crucial safety warning about potential hazards during maintenance and troubleshooting.
Provides step-by-step instructions for brazing refrigerant lines, including safety precautions.
Details the system start-up sequence, including thermostat and power settings.
Provides a checklist for final system checks and operational verification.
To Next Page