ARTC-SVX007A-EN
9
Component Specification
Compact Turbocor Compressor
• Exclusive design of compressor with floating magnetic
bearings
• Variable speed compressor with integrated VFD
• High efficiency with oil-less operation
• Centrifugal design giving low kW/ton
• Excellent capacity control with variable speed and
variable guide vanes
• Superior IPLV values resulting in high energy savings
• Sophisticated digital control/instrumentation of Danfoss
Technology
• Smaller footprint
• Low noise level (less than 70 dBA)
• Lightweight
Flooded Shell and Tube Evaporator and
Condenser
• Extremely compact design
• 225 PSI operating pressure
• Maximum material efficiency due to no “dead zone”
• Small hold up volume uses only fraction of heat transfer
(refrigerant) medium
• Copper enhanced tubing and steel tube sheet
construction
• Operates efficiently at even 1 K temperature difference
• True counter-current flow allows close temperature
approach
• Liquid level sight glass
• Liquid level float switch
• Grooved fluid connection for quick disassembly for
service
Refrigeration Components
• Complete internal refrigeration piping
• Suction and discharge service valves
• Discharge check valve
• Variable speed two stage Turbocor oil-free centrifugal
compressor with internal guide vane
• Flooded evaporator and condenser
• Liquid line filter
• Motor cooling kits
• Relief valves
Electrical
• NEMA 4 rated wired and tested electrical enclosure
• Power block to facilitate single source power
• Circuit breakers for compressors
• Control transformer with primary and secondary fusing
• Touch screen for display and control
• Flow switch
• Interlock auxiliary contacts
• PLC control system
Chiller Description
To Next Page
Loading...
