TK 53050-3-OP-EN
17
6.
Preheater setting button — see ???.
7.
Operating Mode selection button — press repeatedly to change
the mode:
Ventilation
Heating
Cooling
AUTO mode
Reheat
(c)
(TWO DROPS symbol – if available and
configured)
8.
SMOG button
Press to close both HVAC unit and Feedback Fresh Air dampers.
To cancel press SMOG button again. SMOG mode is terminated
automatically after pre-set period.
9.
Passenger's area control
Press red or blue button to set temperature.
Press ventilator buttons to set air flow.
10.
Passenger's area control
Automatic control of required temperature
11.
ECO button
(d)
12. LCD graphic display — see ???.
CCAANNAAIIRREE CCoonnttrroolllleerr