Trane TR1 6022 - Page 78

78
509 through 532, 537 Data Read-out
Value:
Parameter Description Display Text Unit
Updating
No. Interval
509 Reference % (REFERENCE %) % 80 msec.
510 Reference [unit] (REFERENCE [UNIT]) Hz, rpm 80 msec.
511 Feedback [unit] (FEEDBACK) Par. 415 80 msec.
512 Frequency [Hz] (FREQUENCY) Hz 80 msec.
513 User-defined readout (CUSTOM READOUT) Hz x scaling 80 msec.
514 Motor current [A] (CURRENT) Amp 80 msec.
515 Power [kW] (POWER KW) kW 80 msec.
516 Power [hp] (POWER HP) HP 80 msec.
517 Motor voltage [V] (MOTOR VOLT) VAC 80 msec.
518 DC link voltage [V] (DC LINK VOLTAGE) VDC 80 msec.
519 Thermal load, motor [%] (MOTOR TEMPERATURE) % 80 msec.
520 Thermal load, TR1 [%] (TR1 TEMPERATURE) % 80 msec.
521 Digital input (DIGITAL INPUT) Binary 80 msec.
522 Terminal 53, analog input [V] (TERMINAL 53, ANALOG INPUT) Volt 20 msec.
523 Terminal 54, analog input [V] (TERMINAL 54, ANALOG INPUT) Volt 20 msec.
524 Terminal 60, analog input [mA] (TERMINAL 60, ANALOG INPUT) mA 20 msec.
525 Pulse reference [Hz] (PULSE REFERENCE) Hz 20 msec.
526 External reference [%] (EXTERNAL REFERENCE) % 20 msec.
527 Status word (STATUS WORD HEX) Hex 20 msec.
528 Heat sink temperature [°C] (HEAT SINK TEMP.) °C 1.2 sec.
529 Alarm word (ALARM WORD, HEX) Hex 20 msec.
530 Control word (TR1 CONTROL WORD, HEX) Hex 2 msec.
531 Warning word (WARNING WORD) Hex 20 msec.
532 Extended status word (STATUS WORD) Hex 20 msec.
***** ***** ***** ***** *****
537 Relay status (RELAY STATUS) Binary 20 msec.
Logic or
Bus Bus Setup/Preset Setup/Preset Setup No.
Msb Lsb Msb Lsb Preset Ref. No.
00 0 0 1
00 0 1 2
00 1 0 3
00 1 1 4
01 0 0 2
01 0 1 4
01 1 0 2
01 1 1 3
10 0 0 3
10 0 1 4
10 1 0 3
10 1 1 4
11 0 0 4
11 0 1 4
11 1 0 4
11 1 1 4