Trane TR150 - Safety Information and Precautions; Qualified Personnel Requirements; General Safety Precautions; Motor Thermal Protection Setup

7.6.1 Control Card and Control Card Mounting Plate
72
7.6.2 Power Card Cover 72
7.6.3 Power Card 73
7.6.4 Heat Sink and DC Coils
73
7.6.5 Heat Sink Fan Assembly 74
8 I-Frame Size Disassembly and Assembly Procedures
75
8.1 General Disassembly Procedure
75
8.2 I6 Frame Size Disassembly and Assembly Instructions
75
8.2.1 Control Card and Control Card Mounting Plate 75
8.2.2 Cable Mounting Plate 76
8.2.3 Heat Sink Fan Assembly 76
8.2.4 SMPS Card 77
8.2.5 Bus Bar Unit 77
8.2.6 Power Card 78
8.2.7 DC Coil 78
8.2.8 RFI Filter 79
8.3 I7 Frame Size Disassembly and Assembly Instructions
79
8.3.1 Control Card and Control Card Mounting Plate 79
8.3.2 Power Card 80
8.3.3 Power Card Mounting Plate 80
8.3.4 Inrush Card 81
8.3.5 Bus Bar 81
8.3.6 RFI Filter 82
8.3.7 Relay Transducer Card 82
8.3.8 Fan 83
8.3.9 Terminal Plate 83
8.3.10 DC Bus Bar Assembly 84
8.3.11 Heat Sink Fan Assembly 84
8.3.12 Capacitor Bank 85
8.3.13 DC Coil 85
8.3.14 IGBT 86
8.3.15 Thyristor 86
8.4 I8 Frame Size Disassembly and Assembly Procedure
86
8.4.1 Control Card and Control Card Mounting Plate 86
8.4.2 Power Card 87
8.4.3 Power Card Mounting Plate 88
8.4.4 Inrush Card 88
8.4.5 Bus Bar 89
8.4.6 RFI Filter 89
8.4.7 Relay Transducer Card 90
Contents
4 02/2017 All rights reserved. BAS-SVM04B-EN