Trane TR150 - SMPS Card; Bus Bar Unit

8.2.4 SMPS Card
1. Remove the 3 black plastic covers.
2. Unplug and remove the fan.
3. Unplug all other cables.
4. Remove the 2 screws (T20) at MK101.
5. Remove the 3 screws (T20) at K103A, K104A, and
K105A.
6. Remove the 4 screws (T20) and from the SMPS
card.
7. Lift
o
the SMPS card.
Reinstall in the reverse order.
1SMPS card
Illustration 8.4 SMPS Card
8.2.5 Bus Bar Unit
1. Remove the 2 screws from the snubber capacitor
on the bus bar unit.
2. Remove the snubber capacitor.
3. Use a Hex 8 key to remove 2 screws from the bus
bar unit.
4. Remove the 6 small screws (T10).
5. Remove the remaining 9 screws (T20).
6. Unplug cables.
7. Lift out the bus bar unit.
Reinstall in the reverse order.
1Fan
2Bus bar unit
Illustration 8.5 Bus Bar Unit
I-Frame Size Disassembly an... TR150 and TR170 Service Manual
BAS-SVM04B-EN 02/2017 All rights reserved. 77
8
8