Trane TR150 - Power Card

1 LCP and cradle
2 Control card and mounting plate
3EMC shield
4 Terminal plates
5EMC shield
Illustration 8.24 Control Card Mounting Plate
8.4.2 Power Card
1. Unplug and remove the LCP ribbon cable.
2. Unplug all other cables from the power card.
3. Remove 3 screws (T20) on the power card.
4. Remove the power card.
Reinstall in the reverse order.
1Power card
Illustration 8.25 Power Card
I-Frame Size Disassembly an... TR150 and TR170 Service Manual
BAS-SVM04B-EN 02/2017 All rights reserved. 87
8
8