Uninstalling Tracer Summit
BMTX-SVN01C-EN 109
Uninstalling Tracer Summit
1. Close all applications and any active background programs on the
toolbar, such as virus protection software.
2. From the Windows Start menu, select Settings, then select Control
Panel.
3. From the Control Panel, select Add/Remove Programs.
4. From the list of software programs, select Tracer Summit.
5. For Windows XP Professional or Windows 2000 Professional, click the
Remove button for Windows. The uninstall utility removes the Tracer
Summit files from the PC. Once it has finished, you must manually
remove the Tracer Summit directory (c:\Program Files\Tracer Sum-
mit). The uninstall process is now complete.
6. Click the Remove in Tracer Summit Program Maintenance window.
Click the Next button. After Tracer Summit software is removed from
the hard drive, the InstallShield Wizard Completed screen appears.
7. Click Finish.
Configuring BCUs for BACnet/IP
communications
When Tracer Summit is installed, the utilities necessary for BACnet/IP
communications configuration are automatically installed on the PC
Workstation.
To access the BACnet/IP utilities and online documentation:
1. From the Windows Start menu, select Programs, then select Tracer
Summit.
2. Select Advanced to display the menu selections IP Validation (the IP
tools) and BACnet IP Utilities Online Documentation.
The online documentation describes the operation of the IP tools and
explains exactly how to configure your BCU for communication on shared
IP Ethernet networks.
Note:
For detailed instructions on installing and configuring BACnet/
IP Tracer Summit for Windows sites, refer to Tracer Summit
BACnet/IP Network Installations, BAS-PRB004-EN.
To Next Page
Loading...
Need help?
General
