To Next PageTo Next PageWhy is the Trane Tracer TD-5 display blank?
If the Trane Monitor TD-5 display is blank, it might have entered a low-power mode and turned off the backlight. To resolve this, simply touch the screen to wake up the display.
What to do if Trane Tracer TD-5 TD-5 displays a message that it is not communicating?
If your Trane Monitor TD-5 displays a message indicating it is not communicating after powering up, the controller might not be powered up. If necessary, power up the controller or replace the cable.
What to do if button presses don’t work properly on Trane Tracer TD-5?
If button presses on your Trane Monitor aren't working correctly, it could be due to a touchscreen calibration issue. Try cycling the power to the module to initiate a touchscreen calibration.
Defines advisory types (Warning, Caution, Notice) for safe operation and potential hazards.
Discusses environmental impact of refrigerants and responsible handling practices.
Details physical components, screen type, touchscreen operation, and usage guidelines for the TD-5 display.
Covers physical dimensions, VESA mounting options, and installation considerations for the TD-5 display.
Lists technical specifications, agency compliance standards, and input power requirements.
Details the 26 built-in languages supported by the TD-5 display for user interaction.
Explains the three main areas of the TD-5 display screen: Top, Main, and Bottom display areas.
Details packaged contents, additional mounting parts, and VESA bracket installation procedures.
Guides the user through powering up the display for the first time and the touchscreen calibration process.
Describes how to view active and historic alarms, their severity, and sorting options.
Provides instructions for creating, editing, and managing custom data reports on the TD-5 display.
Details standard reports such as System, Compressor, Heating, Configuration, and Sensor reports.
Guides on creating custom graphs, adding data points, and customizing graph appearance and axes.
Describes the eight available standard graphs for viewing various system parameters.
Covers adjusting setpoints, unit setup, display preferences, language, and screen brightness.
Includes procedures for touchscreen calibration, date/time settings, and data backup/restore functions.
Guides users through identifying and solving common problems like blank displays or unresponsive touchscreens.
General
