Trane Wireless Comm - Wireless Zone Sensor;Receiver Association

BAS-SVX40A-EN 21
Establishing the Network
Note: To set up the addressing for this function, see “Setting Wireless Zone Sensor Receiver
Addressing,” p. 11.
Figure 13. Wireless zone sensor/receiver association
Notes: To observe the radio signal strength between the sensor and receiver, press the Test
button on the sensor. For more information about the wireless zone sensor, see the
current edition of Wireless Sensors: Installation, Operation, and Maintenance (BAS-
SVX04).
OPEN NET
GRP NET
NWK
SNSR
RX LINK
CRD