Chapter 3 • Fitting Your Transcend • page 12
4. Connect the headgear to the interface by inserting the ball clips into the
notches on mask shell.
5. Gently squeeze the sides of the arm bar to slide the mask closer or further
away from the face so that it fits comfortably against the nose.
6. Adjust the headgear straps until the interface feels secure.
7. Attach the Transcend H
6
B hose to interface, then attach hose to headgear
with the fold over hook and loop strap.
8. Attach the other end of the hose to the CPAP.
5
87
4
FITTING
To Next Page
Loading...
