Transcend DrivePro 20 - Page 10

Video Length Set the recording length of each recorded video file.
1 min (default) / 3 mins / 5 mins
Light
Frequency
Select the appropriate frequency to avoid flashing A/C light.
50Hz (default) / 60Hz
Video Stamp
Icon Feature Function/Option
Video Stamp
Display the current time of the video being recorded.
Disable / Enable (default)
Date / Time
Format
Set the current date, time, format and time zone.
Device
Icon Feature Function/Option
G-Sensor
Adjust the sensitivity of the G-Sensor.
Disable / Low (default) / Medium / High
SSID Set Wi-Fi name
Password Set Wi-Fi password
Power
Management
Turn on/off the power saving mode. If no vibration is detected in 10
minutes, the dashcam will turn off automatically.
Disable / Enable (default)
Noise
Cancellation
Reduce wind noise when wind strikes the surface of the microphone.
Disable / Enable (default)
System
Icon Feature Function/Option
Time
Synchronized
Synchronize the DrivePro’s system time to that of your smart device’s.
Memory Check the capacity of the microSD card.