Transcend DrivePro 20 - Page 11

Capacity
Format Card Format the microSD memory card.
Upgrade
Firmware
Keep your DrivePro up-to-date with the latest version downloaded from
the Transcend website.https://www.transcend-info.com/Support/service.
NOTE
The firmware upgrade will take about 1-2 minutes. Please do not turn off the DrivePro while
upgrading. The DrivePro will restart automatically after the upgrade is completed.

WARNING
NEVER remove the power cord or the microSD memory card while the firmware is being upgraded.
If the DrivePro cannot be turned on due to firmware upgrade failure, please contact Transcend
customer service for technical support.
