Transcend TS64GDPB60A - Charging the Drivepro Body 60

9
Connected to computer
LED
Status
LED Definition

Flashing
Transferring data
Camera Top View
LED
Status
LED Definition

Flashing
Powering on
Solid
Buffering mode

Flashing steadily
Recording mode
Flashing twice
Audio recording mode
Solid
Browser/connected to
computer
3-5 Charging the DrivePro Body 60
Before use, please ensure that the battery is fully charged. Charge the DrivePro Body 30 via the
bundled 3.5mm to USB cable. A solid orange LED light is visible while charging; the orange LED light
will turn off when fully charged.
To charge the DrivePro Body 30, you can either:
1. Connect the bundled 3.5mm to USB cable to a wall outlet with the included adapter
2. Connect the bundled 3.5mm to USB cable to a computer
3. Connect the DrivePro Body 30 to Transcend’s Docking Station (Optional)
WARNING:
Do not use the 3.5mm to USB cable on other devices.
Recording Indicator