10
4. Recording Videos
4-1 Buffering Mode
Recording in Buffering mode can greatly save storage space as the files are not recorded to the
internal storage.
To power on and start Buffering mode (by default), long press the button; you will hear 1 beep;
the recording indicator will flash blue when powering on and then be solid in Buffering mode.
To power off, long press the button again; you will hear 1 beep, the LED light will then turn off.
To switch between Buffering mode and Recording mode, quickly press the button twice, you will
hear 2 beeps.
4-2 Recording Mode
When an incident occurs, switch to Recording mode. The file being recorded, along with up to 2
minutes of footage prior to the incident, will then be stored on internal memory.
To start Recording mode, quickly press the button twice while in Buffering mode; you will hear 2
beeps, and the recording indicator will flash red. Video files recorded in Recording mode are saved in
the “VIDEO” folder and will be overwritten with loop recording enabled (This function is disabled by
default and can be enabled using the DrivePro Body Toolbox).
One video file is saved for every 3 minutes of recording (by default).
To Next Page
Loading...
Need help?
General
