Transcend TS64GDPB60A - Page 18

17
WARNING:
1. For best recording stability, you are suggested to back up your data using the
DrivePro Body Toolbox each time you finish using the DrivePro Body 30, or format
the device using the Toolbox every 3 months.
2. Please only format your DrivePro Body 30 using the DrivePro Body Toolbox.
Buffered Video Length: Set the buffered video length to record footage that happens prior
to switching to Recording mode.
Available options: 30 secs / 60 secs / 90 secs / 120 secs
Video Stamp: Display the video label, date/time, watermark, and GPS coordinates, on the
photo or video.
Available options: Disable / Enable
Video Label: Tap to edit the video label to be displayed (default label is DPB60_XXXXXX)
Watermark: Display the Transcend logo watermark on the photo or video.
Available options: Disable / Enable
Device
Default Recording Mode: Select the default recording mode.
Available options: Buffering mode (default) / Recording mode
Stealth Mode: Turn on/off the stealth mode. When the stealth mode is on, the light
indicators, buzzer, and vibrator are disabled.
Available options: Disable / Enable
Microphone: Turn on/off the microphone during video recording.
Available options: Disable / Enable
Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Available options: 50Hz / 60Hz
Date / Time: Select the date and time format.
Available options: Y/M/D or M/D/Y or D/M/Y; 24HR or AM/PM
Wi-Fi: Set the Wi-Fi SSID to connect wirelessly to DrivePro Body 60 (default password is
12345678).