TEMP−CONT
Output:3−5.2V
Input:110V, 220V/230V/240V
MAX.
MIN.
0
1
2
3
4
5
6
7
8
9
10
-11-
9. Adjustments
The range of strapping tension is 0-10, so
tension strenght for strapping.
The tension knob is used to adjust the
Tension strenght
that an operator can choose the adequate
strapping tension for a package. Normal-
ly, the knob position 4 or 5 is suitable for
a carton box.
Heater temperature
Adjust the heater temperature by selecting
Set the knob to position 3 or 4.
a position between l and 6. Choose the suitable
temperature, bearing in mind the environmental
seal will not be obtained. Gradually increase
temperature is too high or too low, a proper
conditions of the machine. If the heater
or reduce the position until obtaining an optimum
seal.
To Next Page
Loading...
