Need help?Do you have a question about the Transtecno PG 071 and is the answer not in the manual?
Highlights potential hazards and required safety precautions during operation.
Explains risks associated with incorrect operation or non-compliance with instructions.
Pre-operation checks for oil level, leaks, mounting, and motor voltage compliance.
Identifies common operational problems and provides potential causes and solutions.
General principles for maintaining gearmotor performance, including periodic checks.
Schedules and procedures for periodic inspections and maintenance tasks.
Overview of ATEX compliance, applicable regulations, and product series.
Specific installation checks and procedures for ATEX-compliant gearmotors.
Start-up procedures for ATEX gearmotors, including temperature and ambient checks.
Maintenance and usage guidelines tailored for ATEX gearmotors, including cleaning and lubrication.
Conditions and service factors for specific ATEX applications and gearmotor series.
Prohibited operational modes, environments, and applications for ATEX gearmotors.
Limitations and forbidden applications for ATEX gearmotors, including hazardous area classifications.
General| Category | Engine |
|---|---|
| Compression Ratio | 8.5:1 |
| Fuel System | Carburetor |
| Starting System | Recoil start |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
To Next Page
